Lubricator type FEM

Type FEM has 1-12 outlets and is larger and more powerful than the FLM and is used for lubrication systems with grease requirements up to approx. 1.4 cm³/min per outlet, with continuous back pressure up to 250 bar.
When used with progressive distributors the FEM may also be used to serve significantly more bearings than the 12 outlets provided.

Number of outlets:    1-12
Feed per stroke0.05-0.25 cm³/stroke
Strokes per minute 50 Hz5.6 2.8 1.4 0.7
Strokes per minute 60 Hz6.6 3.3 1.7 0.8
Back pressure, continuous (MPa)25
Back pressure, intermittent (MPa)45
Standard reservoir, manual replenishment. Volume (liter)8   16   46
Reservoir with high, low, and alarm levels. Volume (liter)5   13   40
Reservoir with high, low, and alarm levels.
Closed design for marine environments. Volume (liter)
5
Voltages:3×220-240/380-420 V 50 Hz
3×250-275/440-480 V 60 Hz
3×500 V 50 Hz
3×400/690 V 50 Hz
3×575 V 60 Hz
Other voltages on request.

Ordering code
The easiest way of ordering a lubricator is to use the form below. It allows you to specify type of pump, number of outlets, type of reservoir, number of strokes per minute, and the voltage of the motor. We require all these details to be able to supply the correct lubricator.
ordering_code