HomeSingle line system for grease

Single line system for grease

A simple, reliable and economical lubrication system for
grease, which consists of pumping equipment ,control unit
and progressive distributors. Due to the fact that the grease
is discharged directly from the drum to the lubrication feed
line, you will have a contamination-free system.
– Safe operation.
– Closed system no grease handling is required. The original manufacturer’s drum is used.
– Full system monitoring
– Air operated grease pump.
– Minimum of grease wastage.
The principle of the progressive system

Pump Station
1:65 ratio grease pump, drum lid, follower plate, grease
filter, low level limit switch, air filter/regulator, flow rate
reducing valve, shut-off valves, hoses and air gun.

Weight:     26 kg
For 1/1-drumPart Number: 101909
Weight:20 kg
For 1/4-drumPart Number: 101933

Control unit CCL Alpha
PLC-based control unit for lubrication systems.
Intermittent operation with pre-set time intervals. Only
lubricating when the machine is operating. Monitors correct
operation and discharge of the system. Monitors and alarms
faulty system operation and low lubricant level.

Technical data
Supply voltage, control system:           230 V AC
Supply voltage, inputs:24 V DC
Power consumption:30 VA
Protection class:IP 65
Dim. W x H x D:230 x 300 x 145 mm
Weight:3.5 kg
Part Number:906716

Progressive feeder type PFB or PFG/PFM
The progressive distributor dustributes equal amounts
of grease via pistons in the block to each application point.
Each point will receive, in turn, the correct amount of
lubricant. Equipping the distributor with a cycle
transducer which in turn is connected to the control unit,
will monitor the operating function and alarm, in case of a

Technical data
Lubricant:           Grease up to an NLGI 2
Max pressure:20 MPa (2900 psi)
Max number of cycles per min:200
Discharge per outlet and cycle:0.13 cm³
Max temperature:160° C