Products
Lubricator type FLM
Type FLM has 1-6 outlets and is suitable for small lubrication systems with grease requirements up to approx. 0.55 cm³/min per outlet, with continuous back pressure not exceeding 50 bar. With progressive distributors this single outlet could be used to serve up to 10 lubrication points, depending on the bearings’ grease requirements. Compact design and a good range of accessories make the FLM lubricator highly suitable for reliable automatic lubrication of equipment with a small number of lubrication points.
- Documentation
- Description
- Technical info
Ordering code
The easiest way of ordering a lubricator is to use the form below. It allows you to specify type of pump, number of outlets, type of reservoir, number of strokes per minute and the voltage of the motor. We require all these details to be able to supply the correct lubricator.
| Number of outlets: | 1-6 |
| Feed per pump stroke: | 0,03-0,10 cm³/stroke |
| Number of pump strokes / min 50 Hz | 5,6 2,8 1,4 0,7 |
| Number of pump strokes / min 60 Hz | 6,6 3,3 1,7 0,8 |
| Back pressure, continuous (MPa) | 5 |
| Back pressure, intermittent (MPa) | 10 |
| Standard reservoir, manual replenishment volume (liter) | 2 4 8 16 |
| Reservoir with high, low, and alarm levels. Volume (liter) | 5 13 |
| Reservoir with high, low, and alarm levels. | 5 |
| Voltages: | 3×220-240/380-420 V 50 Hz |
| 3×250-275/440-480 V 60 Hz | |
| 3×500 V 50 Hz | |
| 3×400/690 V 50 Hz | |
| 3×575 V 60 Hz | |
| Other voltages on request |
Related products
Lubricator type FEM
See product
Mounting bracket for lubricator type FLM or FEM
See product
Over-pressure Control
See product
Joining of Lubricator Outlets
See product
System for automatic replenishment of one lubricator
See product
System for automatic replenishment of several lubricators
See product
Replenishment pump
See product
Replenishment pump, ”totally empty”
See product
”Totally-empty” mobile replenishment unit for grease
See product