Cement industry
In the cement industry, historically a lot of lubricators are used mainly for intermediate bearings in screw conveyors. The advantage of the lubricators is that you can get a low but constant supply of the lubricant. The usage of our dual-line grease systems has increased thanks to the flexibility in changing lubrication points and the wider range in dosage amount.
Gear drive Ovens
For the operation of cement kilns, it is practical to spray the grease on the teeth with the Assalub grease spray system.
Generally
Generally, LubeRight is a good complement when dual-line systems is unsuitable but you still want to have control over the grease lubrication. To monitor critical lubrication points, use LubeMon and WLubeMon. The monitoring systems lessens the risk of a critical bearing failure.
Lube Rooms/Lubrication shed
We supply a lot of pneumatic pumps for grease and oil. Our 1:6 oil pumps provide power and flow to pump all kinds of oil up to the thickest gearbox oils. The 1:6 pump can advantageously also be used for NLGI 2 grease for filling grease guns and reservoirs, pure transfer to barrels or other equipment. The most common grease pump is the 1:65 pump with the “totally empty” concept. The pump is used to fill grease guns, manual lubrication, in automatic grease lubrication systems such as dual-line grease systems, progressive systems, or grease spray systems.
